Huntwood Industries (Manufacturer) hereby warrants to the original purchaser* that all products manufactured and sold by Manufacturer are free from defects in material and workmanship for the life of the product. MANUFACTURER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. The coverage provided in this document is exclusive to the original purchaser, is non-transferable, and is predicated upon the criteria outlined herein:

Hinges: Under normal use, the hinges used in Huntwood products will provide a lifetime of efficient operation. They have a maximum operational range when fully open (typically 105°). In the event that the door is opened beyond the maximum published opening, product failure may occur and is not covered under this warranty.

Drawer Guides: The drawer guides used in Huntwood products have a static load rating of 100 lbs. User should be aware that the aforementioned load rating is established with the weight evenly distributed throughout the drawer. Unevenly distributed weight, and/or improper use of the drawer can result in failure of the drawer guide and is not covered under this warranty.

Finish: The protective top-coat applied to Huntwood products is designed to meet and/or exceed the requirements of the Kitchen Cabinet Manufacturer's Assoc. As with any quality finish, it will wear with age and use, depending upon the owner's maintenance of the product. Exposure to abrasive chemicals, solvents, excessive ultraviolet light, and moisture can cause the finish to fail. Due to the variables involved in the maintenance of the finish, the Warranty on this aspect of the product is limited to 2 (Two) Years from the original date of purchase.

Wood Materials: Huntwood utilizes both solid and veneered wood materials in it's products. Due to normal variations in the density and graining of wood itself, the same stain applied to another piece of the same wood specie may result in a somewhat different appearance. This variation can be greater when comparing solid wood to veneers. Additionally, wood species in all finishes will exhibit color changes when exposed to all types of light (natural and man-made). It is the general nature of wood to darken over time. This aging process is not hindered by the finishing process. Color variations are also caused by the assortment of minerals found in the earth in which the tree was grown. The level of mineral absorption will vary in a given piece of wood. All wood species will exhibit the following attributes; sap runs, knots and pinholes. These characteristics will occur in varying degrees dependent upon the type of wood specie selected. This Warranty does not cover the effects of light and aging upon Huntwood product.